Temporary road pads ground protection mats make paving pads challenging in extreme weather conditions. Ground protection materials ensured the progress of construction.
Paving pads ground mats require the installation of temporary roads and work areas to allow access to crews and bands up to several tens of tons, light vehicles, trucks and cranes. This was a challenge as the site's location had only tight access and was made more difficult in extreme weather conditions. The ground became very uneven, very wet and swampy, which made it dangerous for heavy vehicles to work with installers. A safe and secure temporary road and workbench was required to safely carry out the stage installation within the tight time frame required.
Short-term construction projects will all use chevron traction surface temporary road pads that remove mud and grime as vehicles pass over them. The diamond-shaped structural design also reduces side slip and provides forward traction for heavy equipment, machinery and vehicles. The reverse side of the road mat has low profile traction and can be used in most areas where pedestrian workers are used, such as installers.
Heavy duty road mats that provide temporary road and work area access for heavy plant, machinery and vehicular traffic. Each pad can be attached in either orientation for maximum flexibility and coverage. This material is made of composite high-density polyethylene, which has high hardness, toughness, high load-bearing capacity, and is still flexible in use.
It can provide the load of the vehicle and protect the ground at the same time, it can form the shape of the land on the ground and prevent it from sinking on the surface of the muddy swamp. Normally, ground preparation is not necessary before paving road mats. Especially important in power and HV transmission environments. Chemically inert, does not react with acids, bases or solvents. Non-absorbent and will not add weight in wet applications or storage.