4x8 Polypropylene PP Sheet White PP Board Plates Plastic Pad Thick 3 4 5 6 8 10 20mm
Introduction of PP Polypropylene Sheet Board :
PP is a kind of semi crystalline material. It is more hard than PE and has a higher melting point. Due to the high crystallinity, the surface of the material stiffness and resistance to scratch characteristics very well. PP don't have the problem of environmental stress cracking. Moreover, it could offer significant resistance to any chemical or acid.
Typical Properties of PP Polypropylene Sheet Board :
-- Light weight
--Wear resistant
--Low water absorption
--Excellent impact resistance
--Excellent corrosion resistance
--Good chemical stability
--Non-toxic and tasteless
Specification of PP Polypropylene Sheet Board :
Item name | Polypropylene Sheet |
Type: | extruded |
Size: | 1000*2000mm, 1500*3000mm, 1220*2440mm, 1300*2000mm |
Thickness: | 1 to 150mm |
Density: | 0.91 g/cm³ |
Color: | White, Grey,black and so on. |
Material: | New virgin material |
Sample: | FREE |
Food Contact | YES |
Physical Datasheet of PP Polypropylene Sheet Board:
Item | pp polypropylene sheet |
Heat resistance (continuous): | 95℃ |
Heat resistance (short-term): | 120 |
Melting point: | 170℃ |
Glass transition temperature: | _ |
Linear thermal expansion coefficient (average 23~100℃): | 150×10-6/(m.k) |
Flammability(UI94): | HB |
(Dipping into water at 23℃: | 0.01 |
Breaking tensile strain: | >50 |
Tensile modulus of elasticity: | 1450MPa |
Compressive stress of normal strain-1%/2%: | 4/-MPa |
Friction coefficient: | 0.3 |
Rockwell hardness: | 70 |
Dielectric strength: | >40 |
Volume resistance: | ≥10 16Ω×cm |
Surface resistance: | ≥10 16Ω |
Relative dielectric constant-100HZ/1MHz: | 2.3/- |
Bonding capacity: | 0 |
Food contact: | + |
Acid resistance: | + |
Alkali resistance | + |
Carbonated water resistance: | + |
Aromatic compound resistance: | - |
Ketone resistance: | + |